Blueline

Wire-cutting EDM uses a metallic wire (electrode) to cut a programmed contour in a workpiece. The wire can be inclined, thus making it possible to make parts with taper or with different profiles at the top and bottom. The wire diameter is between 0.15 and 0.3 mm.

Wire EDM
  • CA 20

    Workpiece and electrode
    Workpiece dimensions (W x D x H)
    1050 x 765 x 560 mm
    41.338 x 30.118 x 22.047 in
    Travel
    X, Y, Z travel
    350 x 250 x 250 mm
    13.78 x 9.843 x 9.843 in
  • CA 20 U

    Workpiece and electrode
    Workpiece dimensions (W x D x H)
    1050 x 765 x 560 mm
    41.338 x 30.118 x 22.047 in
    Travel
    X, Y, Z travel
    350 x 250 x 250 mm
    13.78 x 9.843 x 9.843 in
  • CA 30

    Workpiece and electrode
    Workpiece dimensions (W x D x H)
    1260 x 945 x 675 mm
    49.606 x 37.205 x 26.575 in
    Travel
    X, Y, Z travel
    600 x 400 x 350 mm
    23.622 x 15.748 x 13.78 in
  • CA 30 U

    Workpiece and electrode
    Workpiece dimensions (W x D x H)
    1260 x 945 x 675 mm
    49.606 x 37.205 x 26.575 in
    Travel
    X, Y, Z travel
    600 x 400 x 350 mm
    23.622 x 15.748 x 13.78 in
  • FW 1U

    Workpiece and electrode
    Workpiece dimensions (W x D x H)
    960 x 640 x 120 mm
    37.795 x 25.197 x 4.724 in
    Travel
    X, Y, Z travel
    350 x 320 x 150 mm
    13.78 x 12.598 x 5.906 in
  • FW 2U

    Workpiece and electrode
    Workpiece dimensions (W x D x H)
    1200 x 740 x 150 mm
    47.244 x 29.134 x 5.906 in
    Travel
    X, Y, Z travel
    500 x 400 x 250 mm
    19.685 x 15.748 x 9.843 in
  • FW 3U

    Workpiece and electrode
    Workpiece dimensions (W x D x H)
    930 x 650 x 400 mm
    36.614 x 25.591 x 15.748 in
    Travel
    X, Y, Z travel
    630 x 500 x 150 mm
    24.803 x 19.685 x 5.906 in