AgieCharmilles CUT 400 Sp

The AgieCharmilles CUT 400 Sp is the most versatile machine range on the market, capable of cutting 45° cones, and can do this whatever the height of the part. The principle of crossed double guiding of the X, Y, U and V axes independently and of the same dimensions, allows machining to be done with a large taper, thurs widening the scope of possible applications for wire spark erosion.

Save energy – an economic and ecological necessity

CUT 400 Sp

The excellence of the AgieCharmilles CUT 400 Sp also resides in the control of operational costs. The otential for using less expensive wires and reduced filtration cost, added to a lower consumption of electricity, make the AgieCharmilles CUT 400 Sp particularly economical machines to run.

In order to control production costs, saving energy has become a priority in many workshops. The Econowatt modules manage the electrical power of the machine so as to never waste energy while the machine is running unattended.

Request a quote for the AgieCharmilles CUT 400 Sp

Key Points

  • Industrial cutting speed  up to 400 mm2/min at low cost
  • Fast improvement of the surface quality (three cuts)
  • Fast threading : 20’’ spark to spark
  • Traveling speed 3 m / min secured by  a proven collision protection
  • Taper-Expert smart module for best taper accuracy


X, Y, Z travel
800 x 550 x 510mm
31.496 x 21.654 x 20.079 in
Working range
U, V travel
800 x 550 mm
31.496 x 21.654 in
Taper angle_height
30 / 510°/mm
30 / 20.08 ° / in
Workpiece and electrode
Workpiece dimensions (W x D x H)
1300 x 1000 x 510 mm
51.181 x 39.37 x 20.079 in
Max. workpiece weight
6613.8 lb
Wire circuit
Available wire diameters (Standard)
0.20 – 0.33 mm
0.008 – 0.013 in
Permissible weights and types of spools (ISO)
55.12 lb


Reference not found: /content/gfac/country_AT/en/service/flyout_teaser/jcr:content/par/sub_navi_teaser